MM (Sheetmetal Worker) - Special Tooling Program

Essential Job Duties:

• Fabricates, assembles, alters, repairs, and installs sheet metal articles and equipment, using sheet metal of 10 gauge or below.
• Cuts metal with hand shears, rotary shears, and/or square shears.
• Shapes metal with brake and forming machine.
• Punches or drills holes for rivets, bolts, and screws with center punch, hammer, and/or hand drill.
• Assembles sheet metal parts, brackets, and hangers.
• Bolts, rivets, fits, or files seams, joints, or rough surfaces with grinding wheel or file.
• Makes layouts on sheet metal according to blueprints or specifications.
• Welds various kinds of metals.
• Must be proficient in reading prints and sketches for the fabrication work required of this craft.
• Ensures accurate and efficient replacement of parts and makes repairs and/or adjustments to equipment, installations and/or fixtures.
• Performs functions under direction of line management.
• Responsible for the maintenance of accurate records.
• Must adhere to Safety, Fire, and Security regulations.
• Must be able to work alone or with others as the job requires.
• Responsible for safe operation and proper care of materials, tools, and equipment.
• Responsible for maintaining a knowledge of applicable Federal, State, Department of Energy(DOE), Corporate and Plant rules, regulations, Labor Agreements and Plant-wide operating policies and procedures.
• Performs other duties as assigned.
• Required to attend and/or successfully complete training classes as determined by the Training and Development Technologies Department, through General Employee Training (Reference DOE Order 426.2), and Management.
• Participates in worker involvement including input to work planning and methods to identify hazards and controls.
• Understands a worker’s right to stop work when they feel their own or other’s personal safety is jeopardized.
• Attends all required safety meetings and training. Offers suggestions on improvements to the work environment.

Skills and Minimum Qualifications:

• Must be able to perform all duties and functions outlined above.
• Must meet initial employment requirements.
• Must be able to read, write, and comprehend applicable written and/or oral instructions.
• Must be physically fit to perform the above job functions as determined by Medical Evaluation.
• Must have successfully completed a four (4) year Pantex approved Apprenticeship which provides experience directly related to the work currently performed by the Sheet Metal Shop, and/or possess a journeyman sheet metal worker certification or five (5) years of relevant experience.
• Must have a valid State Motor Vehicle Operator's License.
• May be required to pass and maintain certification in the Welding Test similar to American Society of Mechanical Engineers (ASME) Plate Test and maintain Certification.
• All qualifications, work history, training, and education are to be verified by direct contact with former employers
and/or documented proof. Ability to perform the functions and responsibilities involved will be determined by a
comprehensive interview and background evaluation.

Education:

High School Diploma or General Education Development (GED)

DOE Order 426.2A Requirements

In addition to the above requirements, the applicant must also meet the requirements of DOE O 426.2A (i.e., High School diploma, or a DOE O 426.2A alternative).  DOE O 426.2A experience requirements can be satisfied following employment.  In the interim, newly hired personnel will not be assigned duties that could impact the safety basis of nuclear facilities.   (Ref. DOE O 426.2A)

Functional Requirements:

• Lifting or carrying {less than 51 pounds (or specify # of pounds _40_)
• Straight pulling or pushing (_2_hours/day)
• Reaching above shoulder level
• Repetitive motion of the wrist/forearm
• Walking (_2_hours/day)
• Standing (_2_hours/day)
• Repeated bending at the waist
• Repeated squatting
• Climbing with legs only (stairs)
• Climbing with arms and legs (ladder, etc.)
• Operation of motorized vehicle:
• Normal far vision in at least one eye correctable to 20/40 (20 feet)
• Near vision (must be able to read computer screen, manuscript, book etc, at approximately 13-16 inches from face)
• Depth perception (ability to tell how close or far an object is)
• Ability to distinguish basic colors (red, green, etc.)
• No evidence of current drug or alcohol abuse
• Ability to use small tools
• Ability to perform safety-sensitive duties

Environmental Factors:

• Constant noise (ex: running engines)
• Impact noise (ex. Air hammers)
• Excessive heat
• Excessive cold/chilling
• Environmental dust (silica)
• Asbestos
• Fumes, smoke, gasses
• Solvents and degreasing agents
• Works on slippery or uneven walking surfaces
• Works out of doors
• Ladders or scaffolding
• Confined spaces
• Prolonged or irregular hours
• Machinery with exposed moving parts
• Vibrations
• Isolated work assignments