Senior Electrical Engineer- HV Substation

 Responsibilities:

The following duties are typical of the position but are not all-encompassing. Responsibilities include those required to deliver quality service on schedule
and within budget in a team environment.

• Lead end-to-end HV (high voltage) substation design (typically 69 kV–500 kV):
  
• Primary: bus configurations (ring bus, breaker-and-a-half, double bus), equipment layouts, general arrangements, sections/elevations, equipment sizing and ratings
  (including BIL), conductor/busbar selection, lightning protection, and insulation coordination.
  
• Secondary/Protection & Control: SLDs/three-lines, protection one-lines, AC/DC schematics, wiring diagrams, panel layouts, cable schedules, I/O lists, RTU/SCADA
  integration, points lists, relay logic/settings.
  
• Grounding/Earthing: ground grid design and studies (touch/step voltages), grounding plans and details.
  
• Auxiliary systems: station service AC, DC systems, and battery sizing, charger selection, UPS as required.
  
• Prepare technical specifications/datasheets and perform vendor bid evaluations for transformers, breakers, disconnects, instrument transformers (CTs/PTs/CCVTs),
  surge arresters, control panels, cables, raceways, and ancillary equipment.
  
• Perform and/or review power system studies: short-circuit, protection coordination, arc flash (per NFPA 70E/IEEE 1584), load flow as applicable; contribute to
  insulation coordination and ferroresonance/temporary overvoltage assessments as needed.
  
• Ensure compliance with NEC (NFPA 70), NEMA standards, and NERC reliability and cyber requirements (e.g., PRC/CIP awareness for protection and SCADA).
  
• Coordinate multi-discipline inputs (civil/structural, telecom, automation) and interface with utilities, ISO/RTOs, and client engineering teams.
  
• Lead QA/QC reviews, check deliverables from junior engineers/designers, and enforce internal standards and best practices.
  
• Provide construction and commissioning support: respond to RFIs, review submittals, support FAT/SAT, and prepare as-built documentation.
  
• Support proposals/estimating, work plans, schedules, level-of-effort, and client presentations; contribute to standardization and process improvements.
  
• Mentor junior engineers and CAD/BIM designers; help build technical depth in the Mumbai team.
  

Requirements

Qualifications:

What will you bring?

• Bachelor’s degree (B.E./B.Tech) in Electrical Engineering required; M.E./M. Tech preferred.
  
• 12 -18 years of progressive experience delivering detailed design for US-based HV (high voltage) substations.
  
• Extensive hands-on experience in the production and verification of comprehensive design packages, including SLDs/three-lines, GA/layouts, sections, grounding,
  raceways, cable schedules, wiring/schematics, protection one-lines, BoMs, and study reports.
  
• Strong comprehension of protection schemes applicable to transmission and distribution substations, encompassing line, transformer, bus differential, distance,
  breaker failure, and reclosing, along with relay setting philosophies.
  
• Proficient in utility interconnection and familiar with standards set by major US utilities; skilled in interpreting and applying client design manuals.Exceptional
  communication abilities and experience in client interactions; adept at leading meetings, conducting design reviews, and addressing technical challenges.
  
• Exceptional communication and coordination abilities.
  
• Must be adaptable to work during evening hours to ensure communication with stakeholders in the USA.
  

Strong command of NEC, NEMA, and NERC requirements; practical familiarity with:

• IEEE/ANSI standards (e.g., IEEE 80/81 grounding and testing, ANSI C37 switchgear/breakers, IEEE 242/399 as applicable).
  
• NESC for substation clearances/approaches and interface with lines.
  
• NFPA 70E for arc-flash safety labeling and boundaries.
  
• Experience with NERC PRC (for instance, PRC-005, PRC-023, PRC-027) compliance implications related to protection design and documentation; knowledge of NERC CIP
  considerations for substation networks and SCADA systems.
  
• Proficient understanding of IEC 61850, DNP3, and the relay families from SEL, GE, and Siemens, along with their configuration tools.
  
• The capability to execute SEL Relay Programming is considered an advantage.
  
• Familiarity with renewable interconnections, battery energy storage systems, and utility-scale collector substations.
  
• Knowledge of US ISO/RTO processes (such as PJM, MISO, ERCOT, CAISO) and specific substation standards for utilities.
  
• Previous experience in an EPC environment and exposure to construction and commissioning activities.
  

Tools/Software:

• Power system analysis tools: ETAP, SKM Power Tools, CYME (any combination).
• CAD/BIM software: AutoCAD, MicroStation; Revit is an advantage.
• Relay configuration software: SEL Accelerator.

Benefits

Additional Perks Offered:

• A collaborative and supportive culture where you’re not just a number—you’re a critical and highly valued member of our team!
  
• Hybrid work arrangements.
  
• As part of a multidisciplinary team, you will experience exciting projects from start to finish and interface directly with some of the most forward-thinking
  clients in the world.
  
• A mindset of continuous learning where you are encouraged to ask questions, bring fresh ideas to the table, and pursue your professional development goals.
  
• A diversity of market sectors, project types, and geographic locations helps insulate your career from economic ups and downs.
  
• A formal career path and real opportunities for advancement.
  
• A holistic approach to compensation and benefits that supports your physical and mental health, encourages work-life balance, and empowers your career advancement
  and financial success.
  

SSOE– The Best of Both Worlds

At SSOE, our growth trajectory allows us to offer the opportunities normally associated with a large firm while embracing the collaborative and supportive
culture often found in smaller firms. As a member of the SSOE team, you will work on exciting and diverse projects for Fortune 100 clients around the globe, supported by the best technology for the task at hand. You will experience our employee-centric culture
that strives to offer a healthy balance, flexible working arrangements, direct access to leadership at all levels, and a mindset of continuous learning. Once you experience the SSOE difference, you’ll understand the why behind our metrics:

• 28% of our employees have been with SSOE for 10 years or more.
  
• 15% - percentage of employees with tenure exceeding 15 years.
  
• 99% - our CEO’s approval rating on Glassdoor.
  
• 98% - portion of our clients who say they would recommend us to a colleague.