O&M / Instrumentation, Controls, and Electrical (IC&E) Technician

The Worthington Generation Station, situated in Switz City, Indiana, operates four LM6000 simple-cycle turbines, providing a combined site capacity of 172 MW to serve the region’s energy needs. The facility is designed to deliver fast-response power, ensuring reliable support during periods of peak electricity demand and system fluctuations. By doing so, its operations play a vital role in maintaining regional grid stability and supporting a resilient, dependable energy supply.

Opportunity Summary

The O&M / Instrumentation, Controls, and Electrical (IC&E) Technician at the Worthington Generation Station supports the operation and maintenance of instrumentation, electrical, and control systems for a 172 MW fast-response generation facility. This role includes troubleshooting, preventive and corrective maintenance, and hands-on training to become CRO-qualified while operating and monitoring plant equipment and control systems. The position provides the opportunity to develop technical expertise, ensure reliable plant performance, and contribute directly to regional grid stability.

Your scope of responsibility as O&M/IC&E Technician will include the following primary functions:

Instrumentation, Controls, and Electrical (IC&E) Systems Maintenance

• Perform troubleshooting, calibration, functional testing, and preventive/corrective maintenance of field instrumentation, analytical devices, turbines, auxiliary systems, and emissions monitoring equipment to ensure accuracy, compliance, reliable operation, and trending analysis for preventive action.


• Troubleshoot control logic, automation software, and programmable systems, diagnosing faults that impact unit startup, loading, and operational stability.


• Maintain and service electrical power and control systems from low-voltage control/instrumentation to 115kv station step up transformer, including motors, 480vac MCC buckets, batteries, battery chargers, inverters, and transformers.


• Conduct light mechanical repairs as needed, including replacing fan belts, bearings, pump couplings and seals, and piping repairs.


• Execute preventive and corrective maintenance on LM6000 turbines and auxiliary skids per OEM guidance including sensor and actuator replacements, wiring and cabling repairs, component and hardware replacement, and equipment upgrades.


• Monitor, maintain, and troubleshoot distributed and programmable control systems, SCADA interfaces, and process automation platforms, resolving alarms, communication faults, and I/O issues affecting unit availability and plant performance.


• Interpret control programs, ladder logic, P&IDs, wiring diagrams, and schematics to support troubleshooting, repairs, and minor system modifications.


• Use advanced diagnostic and calibration tools to evaluate signal integrity, loop performance, and electrical anomalies.


• Install, remove, and replace electrical and control equipment—including motors, switches, wiring, transformers, and instrumentation—in compliance with plant standards and codes.


• Maintain accurate maintenance and calibration records, including work histories, downtime logs, drawing updates, calibration checks, safety verifications, and equipment databases to support compliance and asset management.

The O&M/IC&E Technician will be trained and qualified to perform primary operations and equipment support duties such as:

• Train to become CRO-qualified by gaining hands-on experience in plant operations, control system monitoring, and safe execution of operational procedures.


• Operate and oversee turbines and auxiliary systems, performing safe start-ups, shutdowns, and load adjustments per approved procedures.


• Monitor and control plant operation, responding to alarms, identifying abnormal conditions, and maintaining reliable operation during unattended or minimally staffed periods.


• Conduct field walkdowns to verify system alignment, identify equipment issues, and support troubleshooting and maintenance.


• Maintain accurate operating logs and plant records, ensuring compliance with OSHA, environmental regulations, and site-specific safety procedures.


• Manage warehouse and spare parts inventory, and operate/support plant subsystems including water treatment, HVAC, and fire protection systems.


• Perform additional operational, maintenance, and administrative tasks as assigned by the O&M Supervisor or Plant Manager.

NAES Safe

Safety is a core value at NAES, and as a condition of employment, all employees are expected to remain mentally alert and work safely at all times. Employees must also adhere to all safety warnings and posted signs while on company property. Additionally, they are required to follow all NAES safety rules and procedures. Adherence to these safety responsibilities is one of the key factors in the evaluation of each employee’s performance.

Working Relationships

The O&M/IC&E Technician reports to the Operations and Maintenance Manager and takes general direction from other plant management. Additionally, this position will coordinate with all other plant personnel to ensure safe and reliable plant operations.

Physical Requirements and Working Conditions

Physical requirements include standing for extended periods of time, climbing stairs and ladders, working from elevated platforms and walkways at varying heights, and routinely lifting up to 50 pounds.

Power plant environment that may involve entering confined spaces, crawling through narrow areas, and handling hazardous materials, with exposure to fumes, extreme temperatures, and noise. Work may include high heat near equipment and varying outdoor weather conditions.

Some duties may require the use of protective equipment, which can include hard hats, safety glasses, and eye protection, air masks/respirators, ear protection, chemical suits, flame-resistant clothing (FRC), hot gloves, high-voltage protective gear, and fall protection. Fit testing for respirators may be required. Strict smoking restrictions apply in and around the facility.

Fitness for Duty

All personnel will participate in the Fitness for Duty Program, which includes a post-offer physical examination, drug screening, and post-employment random drug screening.

Work Schedule

The O&M/IC&E Technician works a rotating 8-hour shift schedule, alternating between days and nights to support regular operations and ensure seamless shift transitions. This position will also occasionally necessitate extended working hours and flexible shifts as needed, including weekends and holidays, in response to schedules, workload demands, and plant conditions. Periodic callouts or “On call” status may also be required.

Compensation

This position offers a base pay rate ranging from $43.92 to $52.69 per hour, along with an annual performance bonus.

Core Qualifications and Skills

We are looking for a skilled Technician with experience in power generation operations and maintenance, coupled with a proven ability to contribute effectively to team success and consistently meet performance standards.

• Ability to understand procedures and instructions related to the assigned area, typically acquired through four years of high school. An Associate degree in power plant technology, a related technical field, or engineering is preferred. Relevant industry or military experience may be considered in lieu of education.


• Proven experience in instrumentation, controls, and electrical (IC&E) systems within power generation, including troubleshooting, calibration, preventive/corrective maintenance, and operation of turbines, auxiliary systems, and automation platforms.


• Expertise in mechanical, electrical, and control system maintenance, including field instrumentation, motors, MCCs, transformers, sensors, actuators, and related auxiliary equipment.


• Strong knowledge of distributed and programmable control systems, SCADA interfaces, process automation platforms, emissions monitoring systems, and electrical schematics, wiring diagrams, and P&IDs.


• Skilled in interpreting control logic, ladder diagrams, and automation software to diagnose faults, support minor modifications, and optimize system performance and reliability.


• Thorough understanding of safety protocols, including Lock-Out-Tag-Out (LOTO), electrical safety, OSHA requirements, and environmental compliance standards.


• Advanced problem-solving, analytical, and communication skills, with the ability to document maintenance, calibration, and operational data to support compliance and asset management.


• Must possess a valid, unrestricted U.S. driver’s license and ensure it remains in good standing at all times.

About NAES

NAES Corporation is a leading provider of operations, maintenance, and engineering services for energy facilities. We have built a reputation as a reliable partner for clients in North America and internationally, offering services across the power generation, oil and gas, and renewable energy sectors. Our growing family of companies allows us to address the entire life cycle of power generation and other industrial plants.

NAES is committed to fostering a diverse and inclusive workplace. We prioritize selecting employees based on merit and competence, seeking individuals of the highest quality, without regard to race, color, religion, national origin, gender, gender identity, sexual orientation, age, disability, military status, or affiliation protected under USERRA, or any other form of discrimination prohibited by applicable local, state, and federal law.